Epstein Secrets

up US Department of Energy Commissioning & Green Building Solutions, Inc. IPMVP and AEC New Buildings Institute Harvard Green Campus Initiative Dallas/Fort Worth, Energy & Transportation Management City of Seattle Department of Planning & Development Building Environmental Science and Technology

ity of Systems—Thermal Comfort 1 K Credit 7.1 Thermal Comfort—Design 1 K Credit 7.2 Thermal Comfort—Verification 1 K Credit 8.1 Daylight and Views—Daylight 1-2 K Credit 8.2 Daylight and Views—Views for Seated Spaces 1 Innovation in Design O Credit 1 O Credit 2 Innovation in Design LEED

up US Department of Energy Commissioning & Green Building Solutions, Inc. IPMVP and AEC New Buildings Institute Harvard Green Campus Initiative Dallas/Fort Worth, Energy & Transportation Management City of Seattle Department of Planning & Development Building Environmental Science and Technology

ity of Systems—Thermal Comfort 373 Credit 7.1 Thermal Comfort—Design 379 Credit 7.2 Thermal Comfort—Verification 387 Credit 8.1 Daylight and Views— Daylight 393 Credit 8.2 Daylight and Views—Views for Seated Spaces 407 Innovation in Design (ID) 415 Credit 1 Innovation in Design 417 Cre

inal assembly of components into the building product that is furnished and installed by the tradesworkers. For example, if the hardware comes from Dallas, the lumber comes from Vancouver, and the joist is assembled in Kent, Washington, then the location of the final assembly is Kent, Washington. It m

door Chemical and Pollutant Source Control • IEQ Credit 6: Controllability of Systems ■ IEQ Credit 7: Thermal Comfort ■ IEQ Credit 8: Daylight and Views 3. Summary of Referenced Standards There are no standards referenced for this credit 4. Implementation The credit requirements are satisfied when