Epstein Secrets

tpeening is necessary if the protective coating has been stripped and the disk has accumulated more than 5,000 cycles or 7,500 hours since new -OR- Shotpeening is necessary if the protective coating has been stripped and the disk has accumulated more than 5,000 cycles or 7,500 hours since shotpeened at the

the number of years for when the disk LAST HAD A SHOTPEEN (not that a shotpeen was NOW needed). 3. Engine Manual 773128 Section 72-36-45 Repair-03 (Ni-Cad replacement) Page 903 Number (9): Same comment on how to read the 'OR' statement as item 1 (above). If the conclusion from the Note in Engine Manua

peening is necessary if the protective coating has been stripped and the disk has accumulated more than 5,000 cycles or 7,500 hours since new -OR- Shotpeening is necessary if the protective coating has been stripped and the disk has accumulated more than 5,000 cycles or 7,500 hours since shotpeened at the

the number of years for when the disk LAST HAD A SHOTPEEN (not that a shotpeen was NOW needed). 3. Engine Manual 773128 Section 72-36-45 Repair-03 (Ni-Cad replacement) Page 903 Number (9): Same comment on how to read the 'OR' statement as item 1 (above). If the conclusion from the Note in Engine Manua

vera, 1. Engine Manual P/N: 773128 Section 72-36-45 Insp-00 Page 801/802 states the following. C. Shotpeen the Slots >, Alan EFTA00818321 NOTE: Shotpeening is necessary if the protective coating has been stripped (YES - Disk Overhauled in 2009 with 9,782 Total Cycles & then again in 2014 with same 9,782

At each overhaul, strip old coating and plate. Shotpeen slots. Replate slots and reapply coating 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9) If the disk has accumulated more than 5000 cycles or 7500 hours since new or shotpeened at the las

peening is necessary if the protective coating has been stripped and the disk has accumulated more than 5,000 cycles or 7,500 hours since new -OR- Shotpeening is necessary if the protective coating has been stripped and the disk has accumulated more than 5,000 cycles or 7,500 hours since shotpeened at the

the number of years for when the disk LAST HAD A SHOTPEEN (not that a shotpeen was NOW needed). 3. Engine Manual 773128 Section 72-36-45 Repair-03 (Ni-Cad replacement) Page 903 Number (9): Same comment on how to read the 'OR' statement as item 1 (above). If the conclusion from the Note in Engine Manua

n Mr. Rivera, EFTA00818331 1. Engine Manual P/N: 773128 Section 72.36.45 Insp-00 Page 801/802 states the following. C. Shotpeen the Slots NOTE: Shotpeening is necessary if the protective coating has been stripped (YES - Disk Overhauled in 2009 with 9,782 Total Cycles & then again in 2014 with same 9,782

plate. Shotpeen slots. Replate slots and reapply coating per Task 72-36-45-30-005, (Repair-05). 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9) If the disk has accumulated more than 5000 cycles or 7500 hours since new or shotpeened at the las

tpeening is necessary if the protective coating has been stripped and the disk has accumulated more than 5,000 cycles or 7,500 hours since new -OR- Shotpeening is necessary if the protective coating has been stripped and the disk has accumulated more than 5,000 cycles or 7,500 hours since shotpeened at the

the number of years for when the disk LAST HAD A SHOTPEEN (not that a shotpeen was NOW needed). 3. Engine Manual 773128 Section 72-36-45 Repair-03 (Ni-Cad replacement) Page 903 Number (9): Same comment on how to read the 'OR' statement as item 1 (above). If the conclusion from the Note in Engine Manua

r Mr. Rivera, EFTA00818224 1. Engine Manual P/N: 773128 Section 72.36.45 Insp-00 Page 801/802 states the following. C. Shotpeen the Slots NOTE: Shotpeening is necessary if the protective coating has been stripped (YES - Disk Overhauled in 2009 with 9,782 Total Cycles & then again in 2014 with same 9,782

plate. Shotpeen slots. Replate slots and reapply coating per Task 72-36-45-30-005, (Repair-05I. 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9) If the disk has accumulated more than 5000 cycles or 7500 hours since new or shotpeened at the las