Epstein Secrets

ity of Systems—Thermal Comfort 1 K Credit 7.1 Thermal Comfort—Design 1 K Credit 7.2 Thermal Comfort—Verification 1 K Credit 8.1 Daylight and Views—Daylight 1-2 K Credit 8.2 Daylight and Views—Views for Seated Spaces 1 Innovation in Design O Credit 1 O Credit 2 Innovation in Design LEED

ong-cycle renewable materials by replacing them with rapidly renewable materials. Requirements Use rapidly renewable construction and Division 12 (Furniture and Furnishings) materials and products for s% of the total value of all materials and products used in the project, based on cost. Rapidly renewable building mater

door Chemical and Pollutant Source Control • IEQ Credit 6: Controllability of Systems ■ IEQ Credit 7: Thermal Comfort ■ IEQ Credit 8: Daylight and Views 3. Summary of Referenced Standards There are no standards referenced for this credit 4. Implementation The credit requirements are satisfied when

efurbished materials, such as a door that has been converted into a table, can count toward this credit or toward MR Credit 3.2, Materials Reuse-30% Furniture and Furnishings, but not both. Table 1 clarifies materials considered within the scope of this credit. 234 LEED REFERENCE GUIDE FOR GREEN INTERIOR DESIGN AND CONS

s likely to provide greater daylight access to the building interior. The following credit has related requirements: ■ IEQ Credit 8.1: Daylight and Views—Daylight 75% of Spaces Vision glazing has a direct correlation to lighting design energy conservation strategies. The interior lighting systems des

flows offset a portion of those drawn from the grid. Net project material value includes the construction material value and the CSI Division 12 (Furniture and Furnishings) material value, the lesser of material values for mechanical and electric components, and the salvage value identified in the MR credits. Nonoccup