Back to Network
4
Shared Docs
4
Same-Page
4 / 4
Mentions
Document Mentions (4 shared documents)
2 mentions1 same-page
Page ?Same page
e video that you sent shows that the voltage to the Torque Motors shows a steady voltage signal from the controller, but with a fluctuation from the Torque Motor pressure readings. My original video shows the voltage high, requiring a higher pressure, but PSI low. Any chance that you can have the Torque Moto
were not fully pulled back. My review shows that the engine Idle lights, and the No Gnd Spoiler lights flicker on roll out. I don't think that the Ground spoilers deployed. There is no indication of the T/R s either. I see this as an issue with the entire G-IV fleet, Meridian and others. I don't want
2 mentions1 same-page
Page ?Same page
e video that you sent shows that the voltage to the Torque Motors shows a steady voltage signal from the controller, but with a fluctuation from the Torque Motor pressure readings. My original video shows the voltage high, requiring a higher pressure, but PSI low. Any chance that you can have the Torque Moto
were not fully pulled back. My review shows that the engine Idle lights, and the No Gnd Spoiler lights flicker on roll out. I don't think that the Ground spoilers deployed. There is no indication of the T/R s either. I see this as an issue with the entire G-IV fleet, Meridian and others. I don't want
2 mentions1 same-page
Page ?Same page
e video that you sent shows that the voltage to the Torque Motors shows a steady voltage signal from the controller, but with a fluctuation from the Torque Motor pressure readings. My original video shows the voltage high, requiring a higher pressure, but PSI low. Any chance that you can have the Torque Mot
were not fully pulled back. My review shows that the engine Idle lights, and the No Gnd Spoiler lights flicker on roll out. I don't think that the Ground spoilers deployed. There is no indication of the T/R s either. I see this as an issue with the entire G-IV fleet, Meridian and others. I don't wan
Sponsored
2 mentions1 same-page
Page ?Same page
e video that you sent shows that the voltage to the Torque Motors shows a steady voltage signal from the controller, but with a fluctuation from the Torque Motor pressure readings. My original video shows the voltage high, requiring a higher pressure, but PSI low. Any chance that you can have the Torque Moto
were not fully pulled back. My review shows that the engine Idle lights, and the No Gnd Spoiler lights flicker on roll out. I don't think that the Ground spoilers deployed. There is no indication of the T/R s either. I see this as an issue with the entire G-IV fleet, Meridian and others. I don't want
Sponsored
Mutual Connections (10)
Entities connected to both Torque Motor and Ground
LV
Larry Visoski
PERSON4 w/ Torque·7 w/ Ground
Jeffrey Epstein
PERSON3 w/ Torque·7 w/ Ground
the Torque Motors
ORGANIZATION4 w/ Torque·4 w/ Ground
KALB - Albany NY
ORGANIZATION4 w/ Torque·4 w/ Ground
Teterboro
LOCATION4 w/ Torque·4 w/ Ground
Meridian
ORGANIZATION4 w/ Torque·4 w/ Ground
the Check Valve
ORGANIZATION3 w/ Torque·3 w/ Ground
the G-IV
ORGANIZATION3 w/ Torque·3 w/ Ground
Repair Station
ORGANIZATION3 w/ Torque·3 w/ Ground
PR
Pete Rawson
PERSON2 w/ Torque·2 w/ Ground