Epstein Secrets

the number of years for when the disk LAST HAD A SHOTPEEN (not that a shotpeen was NOW needed). 3. Engine Manual 773128 Section 72-36-45 Repair-03 (Ni-Cad replacement) Page 903 Number (9): Same comment on how to read the 'OR' statement as item 1 (above). If the conclusion from the Note in Engine Manua

tion 72-36-45 INSP-01Page 805 (16). See below. EFTA00818216 (16) Compressor Disk Blade Slots (a) At each overhaul, strip old coating and plate. Shotpeen slots. Replate slots and reapply coating 3.Engine Manual 773128 Section 72-36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9)

At each overhaul, strip old coating and plate. Shotpeen slots. Replate slots and reapply coating 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9) If the disk has accumulated more than 5000 cycles or 7500 hours since new or shotpeened at the las

nual 773128 Section 72.36-45 INSP-01Page 805 (16). See below. (16) Compressor Disk Blade Slots (a) At each overhaul, strip old coating and plate. Shotpeen slots. Replate slots and reapply coating 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9)

plate. Shotpeen slots. Replate slots and reapply coating per Task 72-36-45-30-005, (Repair-05). 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9) If the disk has accumulated more than 5000 cycles or 7500 hours since new or shotpeened at the las

anual 773128 Section 72- 36-45 INSP-01Page 805 (16). See below. (16) Compressor Disk Blade Slots (a)At each overhaul, strip old coating and plate. Shotpeen slots. Replate slots and reapply coating per Task 72-36-45-30-005, (Repair-05). 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replaceme

plate. Shotpeen slots. Replate slots and reapply coating per Task 72-36-45-30-005, (Repair-05I. 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9) If the disk has accumulated more than 5000 cycles or 7500 hours since new or shotpeened at the las

nual 773128 Section 72.36-45 INSP-01Page 805 (16). See below. (16) Compressor Disk Blade Slots (a) At each overhaul, strip old coating and plate. Shotpeen slots. Replate slots and reapply coating per Task 72-36-45-30-005, (Repair-05I. 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replaceme