Epstein Secrets

tpeening is necessary if the protective coating has been stripped and the disk has accumulated more than 5,000 cycles or 7,500 hours since new -OR- Shotpeening is necessary if the protective coating has been stripped and the disk has accumulated more than 5,000 cycles or 7,500 hours since shotpeened at the

tion 72-36-45 INSP-01Page 805 (16). See below. EFTA00818216 (16) Compressor Disk Blade Slots (a) At each overhaul, strip old coating and plate. Shotpeen slots. Replate slots and reapply coating 3.Engine Manual 773128 Section 72-36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9)

vera, 1. Engine Manual P/N: 773128 Section 72-36-45 Insp-00 Page 801/802 states the following. C. Shotpeen the Slots >, Alan EFTA00818321 NOTE: Shotpeening is necessary if the protective coating has been stripped (YES - Disk Overhauled in 2009 with 9,782 Total Cycles & then again in 2014 with same 9,782

nual 773128 Section 72.36-45 INSP-01Page 805 (16). See below. (16) Compressor Disk Blade Slots (a) At each overhaul, strip old coating and plate. Shotpeen slots. Replate slots and reapply coating 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9)

n Mr. Rivera, EFTA00818331 1. Engine Manual P/N: 773128 Section 72.36.45 Insp-00 Page 801/802 states the following. C. Shotpeen the Slots NOTE: Shotpeening is necessary if the protective coating has been stripped (YES - Disk Overhauled in 2009 with 9,782 Total Cycles & then again in 2014 with same 9,782

anual 773128 Section 72- 36-45 INSP-01Page 805 (16). See below. (16) Compressor Disk Blade Slots (a)At each overhaul, strip old coating and plate. Shotpeen slots. Replate slots and reapply coating per Task 72-36-45-30-005, (Repair-05). 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replaceme

r Mr. Rivera, EFTA00818224 1. Engine Manual P/N: 773128 Section 72.36.45 Insp-00 Page 801/802 states the following. C. Shotpeen the Slots NOTE: Shotpeening is necessary if the protective coating has been stripped (YES - Disk Overhauled in 2009 with 9,782 Total Cycles & then again in 2014 with same 9,782

nual 773128 Section 72.36-45 INSP-01Page 805 (16). See below. (16) Compressor Disk Blade Slots (a) At each overhaul, strip old coating and plate. Shotpeen slots. Replate slots and reapply coating per Task 72-36-45-30-005, (Repair-05I. 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replaceme