Epstein Secrets

. Therefore as you can see in the case of this disk (C11 PN:815711.002 SN: BENCAS2345). coating stripped (yes) and 7500 Hours! 5000 Cycles (yes) or Shotpeened at last overhaul (yes) or galling in blade slots (No) mandates the shotpeen during the 2014 strip & recoat of same. Please advise at your earliest

the number of years for when the disk LAST HAD A SHOTPEEN (not that a shotpeen was NOW needed). 3. Engine Manual 773128 Section 72-36-45 Repair-03 (Ni-Cad replacement) Page 903 Number (9): Same comment on how to read the 'OR' statement as item 1 (above). If the conclusion from the Note in Engine Manua

Therefore as you can see in the case of this disk (C11 PN:815711.002 SN: BENCAS2345), coating stripped (yes) and 7500 Hours 1 5000 Cycles (yes) or Shotpeened at last overhaul (yes) or galling in blade slots (No) mandates the shotpeen during the 2014 strip & recoat of same. Please advise at your earliest

At each overhaul, strip old coating and plate. Shotpeen slots. Replate slots and reapply coating 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9) If the disk has accumulated more than 5000 cycles or 7500 hours since new or shotpeened at the las

Therefore as you can see in the case of this disk (C11 PN:815711.002 SN: BENCAS2345), coating stripped (yes) and 7500 Hours / 5000 Cycles (yes) or Shotpeened at last overhaul (yes) or galling in blade slots (No) mandates the shotpeen during the 2014 strip & recoat of same. EFTA00818332

plate. Shotpeen slots. Replate slots and reapply coating per Task 72-36-45-30-005, (Repair-05). 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9) If the disk has accumulated more than 5000 cycles or 7500 hours since new or shotpeened at the las

Therefore as you can see in the case of this disk (C11 PN:815711.002 SN: BENCAS2345), coating stripped (yes) and 7500 Hours 1 5000 Cycles (yes) or Shotpeened at last overhaul (yes) or galling in blade slots (No) mandates the shotpeen during the 2014 strip & recoat of same. EFTA00818225

plate. Shotpeen slots. Replate slots and reapply coating per Task 72-36-45-30-005, (Repair-05I. 3.Engine Manual 773128 Section 72.36.45 Repair-03 (Ni-Cad replacement) Page 903 Number (9). See below. (9) If the disk has accumulated more than 5000 cycles or 7500 hours since new or shotpeened at the las