Epstein Secrets

To: Jeffrey [email protected]] Cc: Richard Barnett From: William Murphy Sent: Fri 3/12/2010 3:28:11 PM Subject: RE: ATT service at 71st street I spoke to Pat and blanketing the island with the An band should be possib

or Antennas and roof penetration. We will need to add a CDMA Yagi Antenna on the Roof and then use a high frequency combiner to send the signals to the Amplifier/ Repeater. This is a heavy duty model that will punch out 80 watts, approximately 10 watts per floor. The Yagi antennas are going to be "tuned" to the ATT tow

To: Jeffrey [email protected] From: William Murphy Sent Wed 3/10/2010 2:47:11 PM Subject: RE: AU service at 71st street This would work for a specific part of the island. I know there is some sign

or Antennas and roof penetration. We will need to add a CDMA Yagi Antenna on the Roof and then use a high frequency combiner to send the signals to the Amplifier/ Repeater. This is a heavy duty model that will punch out 80 watts, approximately 10 watts per floor. The Yagi antennas are going to be "tuned" to the ATT tow

To: Jeffrey Epsteinpeevacation mail.com] Cc: Richard Bamett From: William Murphy Sent Wed 3/10/2010 2:38:38 PM Subject ATT service at 71st street Good Morning Sir, Tom Callahan from Sawyers suggested the following solution. T

or Antennas and roof penetration. We will need to add a CDMA Yagi Antenna on the Roof and then use a high frequency combiner to send the signals to the Amplifier/ Repeater. This is a heavy duty model that will punch out 80 watts, approximately 10 watts per floor. The Yagi antennas are going to be "tuned" to the ATT tow