Epstein Secrets

Antenna $125 (1) High Frequency Signal Combiner (Mounted On Roof) $250 (1) Nema 3 Weather Proof Enclosure for the Combiner on the Roof $160 (1) Sawyers' Labor for the Complete Installation $1100 Complete System Installation $2,235 EFTA00722273

ntial Antenna that could use our existing cabling back-bone. We would still add the second Yagi Antenna and the combiner. We would take the current Antennas off the wall on each floor and "barrel" through bypassing the floor. We would then install a 10db Amp in the existing location and just have the An

71st street does this also work on the island„? On Wed, Mar 10, 2010 at 9:38 AM, William Murphy < 1:> wrote: Good Morning Sir, Tom Callahan from Sawyers suggested the following solution. This would use the existing array of panel antennas in the stairway to redistribute the ATT voice and data frequen

he 1900 MHz CDMA Frequency and combine and amplify them down through (8) Antennas. We will be able to re- use the existing cable, the existing floor Antennas and roof penetration. We will need to add a CDMA Yagi Antenna on the Roof and then use a high frequency combiner to send the signals to the Amplifi

Antenna 125 (1) High Frequency Signal Combiner (Mounted On Root) $ 250 (1) Nema 3 Weather Proof Enclosure for the Combiner on the Roof 160 (1) Sawyers' Labor for the Complete Installation S S EFTA_R1_01497911 EFTA02428440 1100 Complete System Installation $ 2,235 EFTA_R1_01497912 EFTA0242

ntial Antenna that could use our existing cabling back-bone. We would still add the second Yagi Antenna and the combiner. We would take the current Antennas off the wall on each floor and "barrel" through bypassing the floor. We would then install a 10db Amp in the existing location and just have the An

there will always be nooks and crannies that you may have to walk a few paces from to get service again. I need to get a schematic of the island to Sawyers for them to develop a proof of concept quote. As far as improving ATT wireless service to the house at 71" street. The quickest solution is to plac

the 1900 MHz CDMA Frequency and combine and ampler them down through (8) Antennas. We will be able to re-use the existing cable, the existing floor Antennas and roof penetration. We will need to add a CDMA Yagi Antenna on the Roof and then use a high frequency combiner to send the signals to the Amplifi

eet does this also work on the island„? On Wed, Mar 10, 2010 at 9:38 AM, William Murphy <MOIMPMENIMINF wrote: Good Morning Sir, Tom Callahan from Sawyers suggested the following solution. This would use the existing array of panel antennas in the stairway to redistribute the ATT voice and data frequen

he 1900 MHz CDMA Frequency and combine and amplify them down through (8) Antennas. We will be able to re-use the existing cable, the existing floor Antennas and roof penetration. We will need to add a CDMA Yagi Antenna on the Roof and then use a high frequency combiner to send the signals to the Amplifi

Cc: Richard Bamett From: William Murphy Sent Wed 3/10/2010 2:38:38 PM Subject ATT service at 71st street Good Morning Sir, Tom Callahan from Sawyers suggested the following solution. This would use the existing array of panel antennas in the stairway to redistribute the ATT voice and data frequen

he 1900 MHz CDMA Frequency and combine and amplifr them down through (8) Antennas. We will be able to re-use the existing cable, the existing floor Antennas and roof penetration. We will need to add a CDMA Yagi Antenna on the Roof and then use a high frequency combiner to send the signals to the Amplifi