Epstein Secrets

t will punch out 80 watts, approximately 10 watts per floor. The Yagi antennas are going to be "tuned" to the ATT tower and should also pick up the Sprint carrier. The older Nextel push to talk use a different frequency and will NOT work with the new setup. Verizon already has a strong signal so at the

or Antennas and roof penetration. We will need to add a CDMA Yagi Antenna on the Roof and then use a high frequency combiner to send the signals to the Amplifier/ Repeater. This is a heavy duty model that will punch out 80 watts, approximately 10 watts per floor. The Yagi antennas are going to be "tuned" to the ATT tow

t will punch out 80 watts, approximately 10 watts per floor. The Yagi antennas are going to be "tuned" to the ATT tower and should also pick up the Sprint carrier. The older Hertel push to talk use a different frequency and will NOT work with the new setup. Verizon already has a strong signal so at the

or Antennas and roof penetration. We will need to add a CDMA Yagi Antenna on the Roof and then use a high frequency combiner to send the signals to the Amplifier/ Repeater. This is a heavy duty model that will punch out 80 watts, approximately 10 watts per floor. The Yagi antennas are going to be "tuned" to the ATT tow

t will punch out 80 watts, approximately 10 watts per floor. The Yagi antennas are going to be "tuned" to the ATT tower and should also pick up the Sprint carrier. The older Nextel push to talk use a different frequency and will NOT work with the new setup. Verizon already has a strong signal so at the

or Antennas and roof penetration. We will need to add a CDMA Yagi Antenna on the Roof and then use a high frequency combiner to send the signals to the Amplifier/ Repeater. This is a heavy duty model that will punch out 80 watts, approximately 10 watts per floor. The Yagi antennas are going to be "tuned" to the ATT tow