Epstein Secrets

essed on a time and materials basis. New Customer Selected Veneer will be applied to the existing substrates. The new veneer will be finished with Gulfstreant standard III-BIL clear coat finish and polished to a predetermined luster. All applicable internal surfaces will be cleaned and retained in existin

45. Step: 20.1.7 Completed FAA form 8100-2 issued for new registration number by Gulfstream ODA. Step: 20.1.8 Completed If the customer defers Gulfstream ()DA issuance of a replacement airworthiness certificate. a Corridor squawk will be signed as deferred by the customer. Rref : 14 CFR 91.203 (a) (1)

iguration report of the Central Maintenance Computer (CMC). The CMC report can be stored on the aircraft PC laptop then electronically submitted to Culfstream at asc.softwareCrgulfstream.com. Allow three (3) to five (5) days for the CMC report review and up to twenty-one (21) days for the creation of a n

se components and are typically installed during completion. Prerequisites: ASC 908 - PlaneView Master Operating Software System Software Update (Cert Fox) Prior to. or at the time this ASC is ordered, operators will be required to supply a configuration report of the Central Maintenance Computer (CMC

: Title: Company: Gulfstream Proprietary P.O. Box 2206 • Savannah, GA 31402.2206 USA • Telephone (912) 965.3000 • gulfstream.com EFTA00612453 Gulfstrearn: A CI DYNAMICS COMPANY Inmarsat I-5 Jet ConneX (Ka) Coverage Map a ur co' 00' 60' - y I-S Adam% ri 1.5 indon 1-5 Poolc /et COA6tX rel•O

in this Proposal if the foregoing conditions are not satisfied. Unless otherwise indicated on the face of this Proposal, any proposal for Work in a Gulfstream US facility is valid for each Gulfstream US facility. Proposals for work at any non-US Gulfstream facilities are specific and binding only as to the f

Gulfstream. PlaneParts@: Except as specifically identified in a PART I Workscope, this Proposal does not take into account any parts provided under Gulf stream's PlaneParts@ program. To enroll or learn more about the PlaneParts() program please visit htto://www.gulfstream.com/oroduct-su000rt/su000rt-services/

components and are typically installed during completion. Prerequisites: • ASC 908 — PlaneView Master Operating Software System Software Update (Cert Fox) • Prior to, or at the time this ASC is ordered. operators will be required to supply a configuration report of the Central Maintenance Computer (

45. Step: 20.1.7 Completed FAA form 8100-2 issued for new registration number by Gulfstream ODA. Step: 20.1.8 Completed If the customer defers Gulfstream ()DA issuance of a replacement airworthiness certificate. a Corridor squawk will be signed as deferred by the customer. Rref : 14 CFR 91.203 (a) (1)

tion of exterior paint, a weight and balance will be performed on the aircraft. Any items not listed above will be quoted on a per item basis by the Culfstream facility's Paint Operations Manager. including labor and materials on a Work Change Request (WCR). Billing NIethod flours Rate Total Labor USD:

components and are typically installed during completion. Prerequisites: _ ASC 908 - PlaneView Master Operating Software System Software Update (Cert Fox) Prior to. or at the time this ASC is ordered, operators will be required to supply a configuration report of the Central Maintenance Computer (CMC

t (Cart Fox) applicable to aircraft serial numbers 5001 • 5274. Cancelled ref ASC 83A Mx. Notes: This item has been entered out of order. C/W by Gulf stram, Appleton. Work No. SC 6431 CAN CM ASC 970831 ASC 83A PlaneView Avionics Airframe Enhancement (Cart Fox) This service change revision supers

HRS LOG Date CA MM REF M HRS 970841 ASC MA Enhanced Navigation Prerequisites: G550 ASC 908 • PlaneViewg Master Operating Software Update (Cert Fox). This service change revision cancels and supersedes the original issue of ASC 084 datedJune 4. 2010 and is now reissued as ASC 084A. Aircraf