Epstein Secrets

essed on a time and materials basis. New Customer Selected Veneer will be applied to the existing substrates. The new veneer will be finished with Gulfstreant standard III-BIL clear coat finish and polished to a predetermined luster. All applicable internal surfaces will be cleaned and retained in existin

45. Step: 20.1.7 Completed FAA form 8100-2 issued for new registration number by Gulfstream ODA. Step: 20.1.8 Completed If the customer defers Gulfstream ()DA issuance of a replacement airworthiness certificate. a Corridor squawk will be signed as deferred by the customer. Rref : 14 CFR 91.203 (a) (1)

iguration report of the Central Maintenance Computer (CMC). The CMC report can be stored on the aircraft PC laptop then electronically submitted to Culfstream at asc.softwareCrgulfstream.com. Allow three (3) to five (5) days for the CMC report review and up to twenty-one (21) days for the creation of a n

age on APU start. CMC fault code 4922222APU (APU Flow Divider Sol Short) Resolution: Summary: Removed and replaced fuel Bow divider P/N WE3883842-2 S/N NSN and solenoid valve P/N WE3883738-1 S/N NSN. Performed operational and leak check with no defects noted at this time per CN1P 493011. See steps belo

45. Step: 20.1.7 Completed FAA form 8100-2 issued for new registration number by Gulfstream ODA. Step: 20.1.8 Completed If the customer defers Gulfstream ()DA issuance of a replacement airworthiness certificate. a Corridor squawk will be signed as deferred by the customer. Rref : 14 CFR 91.203 (a) (1)

tion of exterior paint, a weight and balance will be performed on the aircraft. Any items not listed above will be quoted on a per item basis by the Culfstream facility's Paint Operations Manager. including labor and materials on a Work Change Request (WCR). Billing NIethod flours Rate Total Labor USD:

1214 Bill To: Plan D, LLC. WO #: SC521661 Invoice Number: 5517132452 Resolution: Summary: Removed and replaced fuel flow divider P/N WE3883842-2 S/N NSN and solenoid valve P/N WE3883738-1 S/N NSN. Performed operational and leak check with no defects noted at this time per CMP 493011. See steps below

Gulfstrearn° Ail DYNAMICS C.CINIIMNY Bldg C.-FAX 561-681-9392 • West Palm Beach. Ronda 33406 PRELIMINARY INVOICE Part/Model #: CHB AC Serial No./fail No.:

emoved the Rill elevator trim tab outboard push pull rod's aft corroded rod end P/N UNK S/N NSN and installed a new rod end / bearing P/N MS21151-8C S/N NSN and new nut P/N AN316-6R S/N NSN. Refer to Gulfstream Drawing 1159020455 Rev. D for work performed. Billing Method Hours Rate Total Labor USD: